As a world-wide leader in industrial coatings and spray-on truck bed liners, ArmorThane provides a full line of high quality polyurethane and polyurea coatings and high-tech spraying equipment and supplies. Our professionally-applied pure and hybrid polyurethane and polyurea formulas are extremely durable, flexible and safe.

There are lots of products on the market that will provide excellent corrosion protection, but Protective Coating are some of the best. To understand the way that they work so well against corrosion, it is important to know how corrosion occurs.

When products are made out of iron, steel, or other metals, they will likely come back to their original state. This process that metals undergo is known as corrosion. Metal corrosion is surely an electrochemical process. Electrons will flow from high energy parts of metal to low energy areas by way of a conducting solution on the surface in the metal.

The conducting option would be called an electrolyte. It is caused by water, rain moisture, or humidity. There fails to need to be many electrolytes in order to cause corrosion. Just 60 % relative humidity will form an electrolyte that triggers corrosion.

High energy areas of a metal is called an anode. Current will leave the electrolyte from your anode and return to the metal. The number of pairs of cathodes and anodes are specific to every sort of metal. Metals with additional pairs are definitely more prone to corrosion. Machined metal surfaces acquire more pairs, as an example. Corrosion can happen within a few minutes within these metals.

The corrosion process brings about the development of oxidation on the metal surface. Physically sturdy metal layers creates a delay within the corrosion process as the layer acts as a buffer between the electrolyte and the metal. When the layer is fragile or porous, the corrosion will continue without interruption.

For example, when you compare aluminium and steel, aluminium is a high energy metal. Atmospheric corrosion is going to be slowed a fantastic amount, but it will not permanently stop. Steel is yet another high energy metal, however it is porous and it has a fragile oxidation layer. Preventing corrosion requires outside assistance.

In many industries, durable corrosion protection is very essential. This is especially true when confronted with steel structures since they are permanently subjected to water in the form of sheet pile walls, breakwater structures, water gates, dams, and barrages. A top quality elastic polyurethane coating system based on raw materials is required.

Polyurethane coatings are highly resistant against water, salts, aggressive chemicals, and abrasion. The coatings are fast drying and curing, making them capable of being applied in critical time windows. Coatings can also be appropriate for cathodic protection systems required in certain industrial environments.

Polyurethane is quite valuable in engines as well as other heat generating applications which need an exclusive form of protection against heat or other corrosive agents. Heat or corrosion resistant polyurethane coatings are formulated to protect up against the oxidation that high heats naturally produce. They also shield metal surfaces against water, acid, along with other corrosive agents.

Polyurethane coatings often cure at 500 degrees Fahrenheit, but could withstand 1500 degrees Fahrenheit of continuous use and short exposure as much as 2000 degrees Fahrenheit. Offshore, military, and chemical processing applications can realize significant performance benefits with heat and corrosion coatings. The life of steel engine components could be extended greatly.

Often polyurethane coatings can be applied within a four millimetre wet film thickness that dries to 2 millimetres. This provides ultimate corrosion resistance on copper and steel components and structures exposed to oxidation and corrosive atmospheres up to 400 degrees Fahrenheit.

Single part and aluminium rich formulas will dry and cure at room temperature to hard, non-porous, and abrasion resistant surfaces. It could be immune to a large range of acids, bases, fuels, and solvents.

Usually, Oil Containment can survive long lasting salt fog, salt spray, and humidity testing over 1000 hours long. Polyurethane coatings does apply right to severely rusted surfaces seen in many maintenance and vqdnaa applications. Application methods could be brush, roller, or conventional pneumatic spray equipment.

Applications can be coating of OEM components, including motor housings, bag houses, cyclones, hoppers, pipelines, and precipitators. Large MRO application structures may also benefit from polyurethane coating inside the power, pulp and paper, and chemical processing industries.

Oil Containment..

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.