You can find various kinds of speakers out on the market today. Finding out what you exactly need may save you some funds, but more significantly, enhance the sound system of your car. Read on for more information on the various kinds of Coaxial Speakers available to you!

Coaxial Speakers

This kind of speakers is the most common. Factory installed sound system usually install at least two pairs of the type in new vehicles. It’s basically a midrange cone woofer with at least one tweeter mounted right on top of it. The end result is really a low to midrange sound reproduction through the midwoofer, as well as having high frequency reproduction from your tweeter.

Older cars usually only have the midwoofer with no tweeter attached to it. As car makers realize the significance of car audio inside the last couple of decades, they improved factory-installed systems with coaxial speakers. Don’t be fooled by car makers today who say their car comes with a 6-piece speaker system because the four speakers are typically midrange woofers, with speakers 5 and 6 being simply detached tweeters. Unless it is actually configured as a component system (explained below), comes with a factory-installed amplifier or subwoofer, you might not call that 6-piece system premium audio; and therefore you should not pay extra for something you will otherwise have.

Additionally, coaxial speakers are typically identified as 2-way, 3-way, 4-way, etc. speakers. Simplistically speaking, a two-approach is one woofer with one tweeter connected to it. A 3-way adds another tweeter, and so forth and the like. You may ask why is it that it even demands a tweeter as well as that I will explain.

A typical non-tweeter speaker will pick up around 15-10000 Hz (remember low frequency means more bass). Regular source units like CD players put out a full range sound, like everyday noise that you simply hear from 20-20000 Hz. Without tweeters, your body will make an effort to reproduce that missing 10000 Hz with something it physically can’t do. The end result will be not only a missing high-frequency sound but also additional distortion or degradation towards the overall sound quality of your own system.

Tweeters allow your system to breed the otherwise impossible sound, giving you a much clearer and defined sound quality. Any extra tweeter adds more detail to the sound because it hones in on the particular range.

Component Speaker System

A Audiophile Cables typically includes midrange woofers, separate tweeters, and crossover filter networks. Precisely what is explained above concerning midwoofers and tweeters apply exactly like component systems. The sole difference, as you may have noticed, is definitely the separate tweeters. It would function the identical exact way because the coaxially mounted tweeters, aside from the crossover filter networks.

These filters improve sound quality significantly by channeling only audio signals the different components could physically handle. For example it could channel only high-frequency signals (10000-20000 Hz) to the tweeters and the lower frequencies (25-10000 Hz) to the midwoofers. The result is definitely an even better sound quality because each component will not be given signals that they could not physically reproduce.

Component systems are generally significantly more pricey but with much improved sound reproduction. Additionally, you generally will not find 3 or even more way component systems because it is unnecessary, because of the filter. This is why I stated that factory installed audio systems would simply be premium in case a crossover network is present.

Cone and Surround Material

The fabric from the woofer or the tweeter plays a substantial role primarily in their longevity. Sound quality is just as good as the whole construction (i.e. voice coil type, magnet size, etc.). Though denser cones (Kevlar, glass fiber, polypropylene) tend to produce better sound quality than thinner materials (cloth, paper), understand that it requires the whole construction to generate great sound so don’t dismiss a set of speakers just since it has thinner cone material. Heavier or denser cone materials xmjnge longer, especially helpful with constant high-power outputs.

Just like cone material, surround material plays a significant role in the longevity of the speakers as well. In their simplest explanation, a cone must progress up and down because it produces sound. Consider your speaker as a trampoline, with all the center elastic material from the cone and the springs on the edges as your surround. The surround should be tough and then stretch just a little bit. Once again, denser material would do significantly better as thinner material tend to fray and degrade as time passes. Most Willsenton Amplifier have foam as the surround material, however, these have a tendency to harden and crack after temperature changes-which happens in your automobile in the summertime and winter with heater or air conditioning (especially under sunshine).

Audiophile Cables – Want More Information..

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.